Thermal insulation material with long-term durability
Extruded polystyrenexpsproduced in 250X60 and 125X60 size plates, depending on the use for which they are intended.
They are produced with many different surfaces such as ribbed (shape) for betta, or straight - flat forihus and roofs (wall) or corrugated iron for various uses.
With these different surfaces, the platesxpsof extruded polystyrene are suitable and meet the requirements of each application to be used.
They satisfy every thermal insulation need, in every building and in general in every construction. The perimeter edges of the extruded polystyrenexpsthey differ and are either right-angled or with cheeks.
The uses of extruded polystyrenexpsare many, in terms of thermal insulation of a building and are perfectly suitable for:
The characteristic advantages of extruded polystyrenexpsare:
Products produced from extruded polystyrenexpsare:
Special products, i.e. plates with increased mechanical compressive strength 300 kpa, 400 kpa, 500 kpa, 700 kpa.
Products with formed on the platesxpsextruded polystyrene gradients from 0.5%
up to 3.00%. These platesxpsare suitable and used on roofs for
thermal insulation, following a special design of the space.
Slabs capable of high adhesion of mortars suitable for use in
external thermal facade (ethics)of buildings.
Slabs covered with tile or cement mortar so-calledroof tiles.
They are suitable for thermal insulation on roofs and roofs and are 30X60. On the extruded polystyrene platexps5cm or 6cm or 7cm or 8cm or 10cm thick, there is an attached granite tile or surface with cement mortar to protect the insulation(xps) to the external conditions used.
the roof tilesthey are very easy to install on roofs and provide the ability to be removed and re-installed on the roof of the next floor when it is built.
Slabs for general building use.They are the most common platesxps and
they are mainly used in construction. They are distinguished in:
The smooth plates – straight (wall) are suitable for thermal insulation of walls and roofs. They are hard and waterproof plates with dimensions of 250 X 60 and in thicknesses of 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 cm. They offer extremely high mechanical strength and balanced resistance to water vapor diffusion. There are also platesxpswith pre-scoring in the width, i.e. 250 X 30 + 30cm for easy cutting when installing them on tiled roofs.
The striated plates(shape) για χρήση σε ξυλότυπους (μπετού). Έχουν στην επιφάνειά τους ραβδώσεις (αυλακώσεις) και στις δύο όψεις τους για καλύτερη πρόσφυση στο σκυρόδεμα, στα επιχρίσματα και σε συγκολλητικά υλικά. Προσφέρουν υψηλές μηχανικές αντοχές, είναι αδιάβροχες και έχουν ισορροπημένη αντίσταση στη διάχυση υδρατμών.
They are available in dimensions 250X60 and in thicknesses of 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 cm.
In our company, you will find extruded polystyrene availableXPSof every type and every form. They are delivered to your building with our crane trucks.