Decorative slats and frames

The wide variety that existsavailable in our companyfrom decorative slats of various types as well as the rich collection of decorative frames, we can distinguish them in three different categories:

The most widespread and popular timber is the selected onedryer grade Swedish pine.In smaller quantities, certain slats are also produced from European beech wood.

Upon order,slats and frames are also produced from varioustropicalwoods such as Agius, Amburra, Iroko etc. Of the European and American hardwoods, oak and pitch pine remain the most popular.

The main categories on wooden slats

Ceiling corners (ceiling frames).They are placed in the corner between the ceiling and the wall. They are available in different widths 5cm, 6cm etc

Plasterboards (floors)They are placed on the wall where the wall touches the floor.

Joint coversThey are placed where there are joints and must be covered (e.g. wardrobe edges) They are available in a thickness of 9 mm. 12 mm ,5 thousand 20 thousand

The sills (for doors)They are nailed and snap-on and are placed at the point of contact of the case with the wall.

Right angles (concaves)They are placed where we want to cover the corners, i.e. the edges that are at right angles (rafters, wall coverings, etc.). They are available in 2cm 3cm 4cm 5cm etc.

The striated beech cones.There are round ones from Φ6 to Φ16

The round poles Φ35, Φ45They are used for curtain rods, flag poles, harpoons, etc.

The battens and laces.They are used in wooden frames and furniture.

Binias and traditional ceiling boards.They are installed in frames, furniture and traditional ceilings.

Rosettes (round and polygonal)They are placed on any type of ceiling before the light is inserted

The fronts of tiled roofs• Available in 10cm, 12cm, 14cm width
• Perimeter when battens are needed on the roof • They are also used as curtain rods. Available in 10cm 12cm 14cm

The handrails, the columns (dads) and the railings.We choose them for internal and external stairs, balconies, terraces, etc.

Roofs for one, two or even three tilesThey are placed over front doors and windows to avoid rain water.

The ready-made door frames.For indoor and outdoor use.

Frames of various types and dimensions.They are mainly preferred in furniture and carpentry

Planed slats 1X2, 1X3, 2X2 etc dimensions.They are used in mosquito nets, wooden furniture repairs and any other use.

Ceiling corners (ceiling frames).They are placed in the corner between the ceiling and the wall. They are available in different widths 5cm, 6cm etc

Plasterboards (floors)They are placed on the wall where the wall touches the floor.

Joint coversThey are placed where there are joints and must be covered (e.g. wardrobe edges) They are available in a thickness of 9 mm. 12 mm ,5 thousand 20 thousand

The sills (for doors)They are nailed and snap-on and are placed at the point of contact of the case with the wall.

Right angles (concaves)They are placed where we want to cover the corners, i.e. the edges that are at right angles (rafters, wall coverings, etc.). They are available in 2cm 3cm 4cm 5cm etc.

The striated beech cones.There are round ones from Φ6 to Φ16

The round poles Φ35, Φ45They are used for curtain rods, flag poles, harpoons, etc.

The battens and laces.They are used in wooden frames and furniture.

Binias and traditional ceiling boards.They are installed in frames, furniture and traditional ceilings.

Rosettes (round and polygonal)They are placed on any type of ceiling before the light is inserted

The fronts of tiled roofs• Available in 10cm, 12cm, 14cm width
• Perimeter when battens are needed on the roof • They are also used as curtain rods. Available in 10cm 12cm 14cm

The handrails, the columns (dads) and the railings.We choose them for internal and external stairs, balconies, terraces, etc.

Roofs for one, two or even three tilesThey are placed over front doors and windows to avoid rain water.

The ready-made door frames.For indoor and outdoor use.

Frames of various types and dimensions.They are mainly preferred in furniture and carpentry

Planed slats 1X2, 1X3, 2X2 etc dimensions.They are used in mosquito nets, wooden furniture repairs and any other use.

the solid wood slats and frames, it is good to paint them with the appropriate wood preservatives - impregnation varnishes in their natural color or in many other shades (oak, walnut, chestnut, etc.). Our company has a lot of quality products ready for deliverywood preservation and staining products. The company produces the most reliable paint maintenance and wood decoration productsBONDEXDenmark. Its top product is theBONDEX MATT WOOD PROTECTION (MATT FINISH).

Also, if you wish to paint them with ripolins as an alternative, our company has themthe products of THRAKON STATUS(primers, water-based polyurethane ripolins, waxes, solvent ripolins, etc.). You can choose any shade you want from 20,000 different shades and we will deliver it to you.